Hotrod cadillac fleetwood's Comments

Comment Wall (30 comments)

You need to be a member of myPOWERBLOCK to add comments!

Join myPOWERBLOCK

At 11:43pm on February 10, 2011, Still Standing U.S. said…
Gold Engine! Pretty Cool!
At 9:16pm on November 27, 2010, Detroit313 said…
hey homie, i got a 9 cadd brougham with the buik 350. i had the cat taken off an put a flowmaster on it. my ? is when i go on long trips the car has a problem starting over an has run on somtmes . do i have to change the pluges ? and check the cooling system?

At 3:10pm on October 10, 2010, Howard Miller said…
If you are still experiencing a lazy throttle response on your cadillac,take the cap&rotor off the HEI and make sure your mechanical advance is not siezed.Quite often the inner shaft will rust till it's frozen in place killing your mechanical advance and your throttle response with it.A recurve kit will also be helpful on a stok distributor
At 8:48am on August 9, 2010, Ronnie Inskeep said…
love tha caddy thanx 4 tha add
At 7:20pm on May 12, 2010, Ethan Novinsky said…
every now and again...my folks still live up there, and I work in perrysburg...
At 11:16am on August 16, 2009, Mark McK. said…
I hope that helps you, kinda hard to explain. Since your painting the wh*** car the inverted way makes a nicer job (painting the stripe color first). your stripes will look like your masking when you ge it masked off. Your basicly covering what you dont want painted. I'm sure you'll do just fine. Post some pics when you finish, like to see it.
At 7:48pm on June 4, 2009, jose said…
damm those vid on my space r nasty
At 7:11pm on April 2, 2009, jose said…
love the in side of that trunk
At 2:57pm on March 29, 2009, jose said…
damm nice caddy ..
At 11:35pm on March 21, 2009, greg said…
that is a sweet ride guy. I always wanted to build one but I never have. I had a 81 cutless that I only made it as far as putting 80 spoke luxers on but I didn't have the guidance to help me with putting switches on it, so I just stuck to air shocks. Sweet though. Nice work.
At 11:30pm on March 21, 2009, greg said…
thanks guy for checking on that for me. was just up late one night and was thinking about it. Thanks agin
At 4:15am on March 13, 2009, dson said…
nice ride!. that caddillac is clean. give you some props on your ride.
At 1:56am on March 2, 2009, James said…
HI engine grooup Im new to site.I have a 2007 sierra cwcb. i've install a intake,exhaust & headers. what else can i do too gain hp. I can install under drive pulleys, would my next addition be supercharger. I ask for feed back.
At 8:03pm on February 17, 2009, Raging64 said…
Send me a picture of the rear Differential cover, I should be able to tell ya if it is a 8.5" ring gear setup. raging64@hotmail.com
At 9:41am on February 2, 2009, Troy Webster said…
Charles, I try to (invite friends) and it has a box to put e-mail address but it doesn't have the @ rocketmail listing , How do I get past this? You may not be the person I should be asking. Thanks.
At 4:23pm on January 11, 2009, Kalebmundo said…
Ya, I had a chance to get a brand new IROC, but i didnt want it. I made a promise to fix this up, and turn it into somthing amazing, and Im gonna keep that promise. And thanks for the props! I'm changing so much anyway, that those spots are too much anyway. Its basically going to be a race car that has street manners, and safety. Nice ride by the way man :D
At 1:08am on January 10, 2009, mrj said…
Nice Caddy! Checkout some lowriders from SoCal >> http://www.mypowerblock.com/photo/albums/2170052:Album:39079
At 9:07pm on December 18, 2008, Chris said…
Nice Lac, Im glad to see im not the only old sculer around.
At 8:28pm on November 23, 2008, Kyle said…
nice. i got two 305s and a 350 sitting around my shop lol. i need to start working on them sometime. i wanna stroke one of the 305s up to 335 and put some vortec heads on it with a 625 cfm demon jr. carb on top. along with a healthy cam. i want to try to clearance the mains and rods too. maybe .020/.020 but not sure yet.
At 8:19pm on November 23, 2008, Kyle said…
i'll probably still be around here, i know these things dont spring up overnight lol, i got a few things i would like to try and build up as well. Oh if u put a bigger cam in your engine u might need to upgrade the valve springs in your heads. i had a friend that found that out the hard way.

PB Social

Subscribe to PowerBlock Blog via RSSLike PowerBlock on FacebookFollow PowerBlock on Twitter

© 2014   Created by Gearhead.

Badges  |  Report an Issue  |  Terms of Service