Network for PowerNation fans

did not get to adjust and test run this 91 305/5.0 valves before i had to use i have finally gotten it adjusted, but still clinking over 30mph.......what/how else do i check for/adjust?

Views: 11


You need to be a member of myPOWERBLOCK to add comments!


Comment by Daryl Lee Scott on June 13, 2011 at 11:13pm
check your u joints sometimes they pop click and clunk over a period of time, also if the exhaust manifold is missing a bolt such a noise can occur under acceleration

© 2017   Created by Gearhead.   Powered by

Badges  |  Report an Issue  |  Terms of Service