April 2010 Blog Posts (53)

1966 volvo wagon

. I own a really sweet 1966 Volvo

122 wagon. I would love to put a v6 under there. there looks like

plenty of room. my problem is, which motor to use. I'm not familiar

with specific aspects of the different motors…

Continue

Added by James B. Culbreath on April 7, 2010 at 3:46pm — No Comments

LOOKIN FOR.....

A Nova.... preferably beat to poop. Just need it to run relatively nice. I want something i can clean up and eventually take down to raceway... just for the fun of goin down the strip. If anyone sees one let me know!!!!

Added by Hunter Michael Plant on April 6, 2010 at 2:05pm — No Comments

Holy cow what a sweet sound

i fired the brand new engine today and holy s*** does it sound great. its got a 268s comp cam in with solid lifters and roller vortec heads with 58cc chambers 185 runners with 30 thou over bore and flat top pistons. should be around 10:1 compression and she sounds nice with the straight pipes on her. and i also have a 250 shot of nos on her to so i cant wait to see how much hp and torque i have at the rear wheels. with and without the nos.

Added by Darryl Elke on April 5, 2010 at 10:46pm — No Comments

The specs

Basic info on my truck

Its a 64 half ton long bed stepside

I have rebuilt the front end of the truck tie rods ball joints shocks complete wheel cylenders from the drums back, I have not done any of the body work or the paint work that is currently showing on the truck it came like that other then the stepside bed i got lucky and found another 64 chevy truck with this and i thought it would look better and stand out from all the short beds and the fleetsides. I put in a new…

Continue

Added by Jacob Gardy on April 5, 2010 at 10:43pm — No Comments

running down the road!

Finally got the impala back in action!first the carb and now a two day battle with the drive shaft!(that I won).nothing like the first cruise of the season,thumbs up all around.:)

Added by Russell Purnell Jr. on April 4, 2010 at 8:00pm — No Comments

1949chevy 3100 pickup

the frame is a 1982 chevy short bed the and bed is a 1949 half ton 350 ci 350 trans at me and son and friend build this trk 3 and half wk from the frame up your show teached my alot thing ihave work on 25 years or more thanks for reading my email ilove the show keep up the work my name is jerry w taylor sr phone is 540-678-0336 or 540-327-2168

Added by jerry taylor sr on April 4, 2010 at 6:39pm — No Comments

My first Blog (A little about me)

Hey everyone my name is Lance and this is my first blog so please bear with me as I ramble off a little about myself. First I would like to say that I am a true and through “Car guy” (For those of you that read Jeff Fords “Car guy” column in the PB mag 4/2010) I am extremely passionate about the automotive industry and I take pride in my work, I don’t turn a wrench for a paycheck I do it for the love of cars trucks and just about anything with a motor that grabs my attention. I have tinkered… Continue

Added by Lance on April 4, 2010 at 12:59pm — 2 Comments

trying to get prime tool for sbc

going to have to wait till monday now to be able to fire the motor. cause i cant get a prime tool for a sbc till then. but it will be nice to get it up and running. i cant wait to see how she runs.

Added by Darryl Elke on April 3, 2010 at 11:39pm — No Comments

On my way home

I'm on my way home with my 2006 Dodge Powerwagon. She's got a 12 inch lift with 38s under her. We usually drive on the frozen ocean but this year the rolligons have came in from Prudhoe Bay and made a trail to Barrow, Alaska, where I live.

12 above out there - we should be fine. Hope to see some wildlife on the way like, musk ox, caribou, polar bears, foxes, wolves, wolverines....…

Continue

Added by Curt on April 3, 2010 at 11:29pm — No Comments

High Nickel engine block (35O) pre 1976.

Hello: Can anyone tell me where i could get the listing for the small block high nickel content casting dates, years, and I.D. numbers?

Added by Barnhart Kurt on April 3, 2010 at 5:41pm — No Comments

waiting for my new pictures to up load

i just up loaded 20+ new pictures just waiting to be aproved and then everybody can see them. as soon as i can get her fired the car and everything is broke in im going to get her dynod and i will post rwhp and torque numbers here as well. and hopfully she'll be up there. but will see. if not then i have the 250 shot of NOS i can use. and if i dont use that i am looking at getting a procharger to add.`

Added by Darryl Elke on April 3, 2010 at 10:13am — No Comments

been working like crazy on the new motor

its been 3 weeks now since my old motor blow up and now i have 3/4 of my new motor put together. so im getting real happy. im going over everything 2-3 times to make sure everything is done right. i hope to be able to fire the motor today but will see. if not i should be ready to go on monday. i just need a few more small little parts like a oil pressure line but its got to be Steel braided cause the plastic s*** just dont cut it anymore. and i need a few more bolts and need to get rid the… Continue

Added by Darryl Elke on April 3, 2010 at 9:37am — No Comments

You're not living in the real world!!

You're not living in the real world!! Continue

Added by Joe Banana on April 1, 2010 at 7:13pm — No Comments

Blog Topics by Tags

Monthly Archives

2014

2013

2012

2011

2010

2009

2008

2005

1999

PB Social

Subscribe to PowerBlock Blog via RSSLike PowerBlock on FacebookFollow PowerBlock on Twitter

© 2014   Created by Gearhead.

Badges  |  Report an Issue  |  Terms of Service