All Blog Posts (3,610)

dream car

So sad news. My first project turn out to be made entirely out of Swiss cheese. Many may think well that's fine some welding and paint it'll be fine. Will I'm not talking about the body... the frame.... ya I can stick my hand through it. Me and my uncle finally got it onto a hoist and got her ubove our heads and just swiss cheese front to back. Rust rust rust rust rust! So on the good side I have a perfect 400 small block running strong and a th400 behind that and a 14 bolt behind that. So all… Continue

Added by ian Potrament on April 23, 2014 at 5:00pm — 1 Comment

Ford 460 help

curently trying to get to get my first project car together, there is a guy that sold me a ford 460 big block from what i believe 1972. i know that on 2 minute tech they made a 460 big block produce a little  over 600 ponnies. just wanted to know if anyone could email or message me with a parts list.

Added by Francisco Martin Ripel on April 21, 2014 at 7:25pm — No Comments

Ford Motor Build

I have a question ? The Ford Stroker Motors, Built off of the 351W Block, can you put the Cleveland heads on them like the BOSS 302 did ?

Added by Roger Neff on April 3, 2014 at 4:00pm — 1 Comment

felt lubricators for welders

just saw on extreme the felt lubricators for the mig welders. Where can I find these?  My shop uses Four large welders that need these. 

Added by Owen Lee Green on March 30, 2014 at 11:53am — 1 Comment

chevy engine

Bought a 66 Chevy truck, was told it has a 400 small block. Trying to make out what it is, numbers in front of heads on block on passenger side reads 87488C

Added by James G. Nunn on March 7, 2014 at 2:13pm — 2 Comments

small block chevy engine

I bought a 66 Chevy pick up and was told engine is a small block 400 hundred trying to determine if it is, my numbers off block in front of heads reads 87488C anyone know what it is

Added by James G. Nunn on March 7, 2014 at 1:56pm — 2 Comments

Toyota Highlander Owners, Do you have a white spot on your headlights?

Although I have not run across this problem yet, as this is old news, but a fellow headlight restoration company “M & J's Headlight Restorations” located in Towson,…


Added by Scott Summerson on March 6, 2014 at 4:03pm — No Comments

Corvette Nose Mask, Bra New

Hello, I have a Corvette Nose Mask, or Bra, Covercraft, With Embroidered Logo, 1975-1979,( Brand New in box ) In addition to paint protection, Covercraft masks offer "breathable" vinyl, which allows moisture to escape thereby keeping your paint in perfect condition. Covercraft masks are designed not to flap or lift at highway speeds.) Same brand Bra with Embroidered Logo that doesn't have embroidered Corvette name, sells for $139.99 )Mine has embroidered Corvette Logo &…


Added by Scott Summerson on March 5, 2014 at 9:52pm — No Comments

Before Painting Your Car Be Sure To Do This!

So you want to paint your car...It's easy to get excited and skip some of the most important steps.  The professional paint job does not start with the spray gun, but with important steps that start way before the paint booth.

In this Eastwood series video, we're going to give you some of the most often skipped or forgotten steps that can make a difference in an awesome paint job or an eye sore.



Added by Don Smith on March 4, 2014 at 10:30am — 1 Comment

rear end out

well I pulled my third member, now I'm not sure...

I am not sure which unit I have. I was told it is a sure grip 3.91 to one. look at my pics to help

Added by Rod Haney on February 23, 2014 at 6:24pm — No Comments

Building the big green saturn it started as 94 saturn with an 81 chevy luv diesel chassis engine and trans 4x4 now it is a 94 saturn with a 76 k5 blazer chassis frame was shortened 5 1\2" the engine …

Building the big green saturn it started as 94 saturn with an 81 chevy luv diesel chassis engine and trans 4x4 now it is a 94 saturn with a 76 k5 blazer chassis frame was shortened 5 1\2" the engine was moved forward 8"the transmission is a turbo 400 with a divorced np203 transfer case and a custom transfer box to make the 6 wheel drive work the frame was was extended in the rear for the extra axle now I am in the process of fabing the extra rear fenders and trunk section I have just over 200… Continue

Added by bree on February 21, 2014 at 1:47pm — No Comments

3d cad programs?

Okay im looking for a 3d cad program that i can build roll cages, tube chassis, and bumpers from basically scratch on. Anyone know of a program i can get/ use? Perferbly not one thats going to cost me out the butt.

Added by GettinMyHandsDirty on February 9, 2014 at 8:50pm — No Comments

it lives

started the big pig last night, 440+ cubic inches of fun

Added by Rod Haney on January 31, 2014 at 9:00am — No Comments

'49 ford f2 rear

wanting to replace the rear in my truck with something that keeps the 8 lug. looking at 4:11 gears and do u know of a year that's plug and play.. needs to be a F250 rear. looking for years to look at.

Added by william on January 9, 2014 at 4:53pm — No Comments

87 Suzuki samurai

I have a 87 Suzuki samurai. I recently bought in pices on Craigslist. I don't know a lot about it except it has a Nissan hard body engine and trans, and wrangler axles... My friend told me to post to see if we could get any ideas.

Added by Mike on January 6, 2014 at 7:00pm — 1 Comment

What can I do with a 68 chevy 307 small block .. For cheap deal in Monte Carlo 307

I need help , I wanna know what can I do to a chevy 307 68 Chevelle motor in a 1981 Monte Carlo .... For cheap 13 sec car in 1/4

Added by SmallBlockMonte on January 6, 2014 at 6:14pm — No Comments

What's the deal with online shows?

So, what's going on with the programming?  Did everything just get re-named and moved over to the cable-only networks?

Is anything going to EVER be available online again?

Added by Warren D. Murphy on January 5, 2014 at 9:19am — 1 Comment

When does 2014 season start on SpikeTV

I've looked everywhere & nowhere csn I find the schedule for 2014. When does the new season begin??

Added by Robert Savittieri on January 4, 2014 at 6:54am — 1 Comment

88 Camaro advice

I have a 1988 I-rocZ28 Camaro. A little about it:...5 speed, t-tops, 3rd break light built in the spoiler wing, 350 tpi, 5.7 L, all factory but I have underdrive pulleys from my understanding this is not the original engine that goes in this car, this supposed to be a 350 Chevy vet motor. On the motor it has a EGR valve with a temp sensor and I want to replace the EGR valve but does anyone know where to get some aftermarket parts from because I want to upgrade to a 6 speed transmission. I…


Added by Mario Suber on December 14, 2013 at 6:23pm — No Comments

How to reg for 1970 g machine monte carlo

How do u reg for 1970 monte Carlo would love to have a chance to win it . My mom bought one new in 1970 and I loved it

Added by Pete on December 8, 2013 at 8:33pm — 1 Comment

Blog Topics by Tags

Monthly Archives










PB Social

<script type="text/javascript" charset="utf-8" src=""></script>
<noscript><a href="">Which name do you prefer for a new automotive content website?</a></noscript>

© 2014   Created by Gearhead.

Badges  |  Report an Issue  |  Terms of Service