Network for PowerBlock fans
sam kepler's Page
Latest Activity
newbie here but not to muddin, ihave a couple questions. will a 94 suburban fit on a 77 3/4 ton chassis or would it be easier to swap leaf springs and 1 ton axles to the suburban and i have 350 what would be a good power combo, rollin on 38"s thanks
Group for mud trucks from all over the united states.
i have a 95 chevy 350 whats the most hp can i get? what combo? wit a reasonable price this is going in a 94 suburban. towing/mudboging
A 350 and 400 flexplate are different. Unless you are running a 400 crank in a 350 block to increase displacement, a neautral balance flexplate (400) should not be used.
Hope this helps
Kingman Kid
Jerry
the starter shims seems to be fine, the whole starter looks like it needs to move half a bolt back towards the tranny its only catchin a little bit of the flexpate
is a 350 flexplate the same as a 400 flexplate
I am assuming that you mean "eating" that it is taking the teeth off of the starter and flywheel. Sounds like to me you have a mismatch starter and flywheel. I am assuming that you do have a early 350 block with the 2 piece main seal. Those use th...
ive got one shim between starter and block, sounds good for 2 or 3 starts then it kicks back and then u have to loosen starter and tighten it back up and it works fine for 2 or 3 times
Do you have the shims between the starter and the block? Each block/starter seems to nee from none to multiple shims to keep the starter at the correct distance. I think that you can place a .125" drill between the teeth to give the correct cleara...
69' chevy 350 bored 30. over, edlebrock perf heads, intake, 650 carb, biggest cam edlebrock makes, accel dist., but it takes a staggerd 400 starter, and it keeps eating flywheels and starters, it will start fine 2 or 3 times then it will eat the s...
this group is for anyone that needs info on engines of any make!
Profile Information
- First Name
- sam
sam kepler's Photos
Comment Wall
- No comments yet!
© 2009 Created by Gearhead
