"hi Austin i have basic same set up the cam i am using is a comp solid lifter part #12-607-5 and crane roller rockers engine idles fair makes about 12# vac**m at idleand pulls strong 2 6100 rpm that was in my set up before stroking and just putting…"

"yes u will like them do yours have mounting h***s for your alt? what trans are u using ?reason i asked my son used a 5 speed  and it didn"t last 2 long"

"do the heads have the 2.02  1.60 valves because when i installed mine i picked up .5 on the track they are a good head only down fall they aren"t drilled for alternator brackets in my case does not matter cause i run on batterys alone…"

"great is the 8.8 the right width for u? what  engine  work are u  doing  u said small block right  talk 2 u later rob"

"hi austin did u get that cam out? put my engine together3 times now grinding and polishing for rod and crank clearances the cam 2 rods no issues, that eagle stroker kit is nice 2 work with , next time together should be the last time. truck is being…"

"hi u did remove the lifters ? rob"

"don,t know my rearend is already set up, and the guy whoe is doing the work  has done a lot of them ' i,ll take some pictures 2 show how it is going rob"

"sounds good sat crank in block and only had 2 trim pan flange in one area. putting piston and rods in next and check clearances again and have a buddy coming over 2 see how were going 2 back half and 4 link the 9" i,ll talk 2 u later rob"

"i am in the process of stroking also "eagle kit internely balanced just got block back from machine shop .040 and cam bearings just starting 2 assemble and check clearances . comp solid cam hooker long tube headers roller rockers camal hump…"