Network for PowerBlock fans
oldmenoffroadcustoms's Groups
-
XJ Junkies
43 members
-
drive it every day
88 members
-
JEEPS
664 members
-
XTREME 4X4
1200 members
oldmenoffroadcustoms's Page
oldmenoffroadcustoms's Photos
OLDMENOFFROADCUSTOMS
HOME TO THE ULIMATE DUAL PURPOSE RIG Our goal is to provide services for the blue collar guy and gal. With our competitve rates sure not to damage your bank. We also offer our RIG INSPECTIONS for your dual purpose or trailerd rig. We also offer custom paint and sheet metal work, color matching or complete color changes. But we dont stop there we also do bumper to bumper builds. We can build your dream dual purpose rig that will last. In our shop we have over a combine 50years of experience to assist you in your build. SHOP RATES ARE AS LISTED (STANDARD REPAIRS @ $75.00 HR)
(FABRICATION & BODY @ 85.00 HR)
(ONE OFF FABRICATION @ $105.00 HR)
(RIG INSPECTION STARTING @ $150.00 TO $250.00)
You can contact us at (951)534-4843 or here on powerblock or send an e-mail to www.oldmenoffroadcustoms@yahoo.com We are open MON-FRI 8AM TO 5PM AND SAT BY APP. ONLY CLOSED SUNDAY
COMEING SOON DIRECTIONS ON HOW TO HIGH CUT REAR FENDERWELLS ON XJ'S AND QUARTER PANEL TUCK'S. ALSO HOW TO ADD INCH'S TO YOUR FRONT WHEELWELLS TO CLEAR 35" TIRES AND TURN WHEN STUFFED
ALSO COMEING SOON ROCKSLIDERS FOR XJ'S AND EXO-CAGE COMPLETE (ROCKSLIDERS ARE A WELD ON APPLICATION)
(FABRICATION & BODY @ 85.00 HR)
(ONE OFF FABRICATION @ $105.00 HR)
(RIG INSPECTION STARTING @ $150.00 TO $250.00)
You can contact us at (951)534-4843 or here on powerblock or send an e-mail to www.oldmenoffroadcustoms@yahoo.com We are open MON-FRI 8AM TO 5PM AND SAT BY APP. ONLY CLOSED SUNDAY
COMEING SOON DIRECTIONS ON HOW TO HIGH CUT REAR FENDERWELLS ON XJ'S AND QUARTER PANEL TUCK'S. ALSO HOW TO ADD INCH'S TO YOUR FRONT WHEELWELLS TO CLEAR 35" TIRES AND TURN WHEN STUFFED
ALSO COMEING SOON ROCKSLIDERS FOR XJ'S AND EXO-CAGE COMPLETE (ROCKSLIDERS ARE A WELD ON APPLICATION)
Latest Activity
timeing issue its proble really retarded or the vacum or mech advance it done. check your timeing and dis for wear
you could mount under batt box or in the area if not under the brake booster
your toe in and out is off on your blazer. call and see if you can get the specs on you toe jack it up and give it a tap alinement try that if that dose not cure it some thing is bent or ball joints are history
Yes and I have had no problem's with them. A customer of mine with a TJ on 37" beat's them up on a regular basis. It is a good investment
Cool thank you
You should be able to disable it by disconnecting the switch in door jam. One of your switchs are proble bad or stuck spay some dry grafite on them. If the dose not work you should have the relay under driverside of dash
Contact the guy's over at Banning Drive Line in Banning, Ca (951)849-3854 they can build you what you need.
no you wont have any issues, just get the right measurements from t-case to pinon yoke. and depending on what state your in for the swap there are kits or you can pice together what you need to be smog leagal. remember you can only swap in the sam...
yes rustysoffroad has a kit for the liberty and is only a 2.5 lift. they are one of my vendors for my shop oldmenoffroadcustoms
Oldmenoffroadcustoms's Blog
TERRA DEL SOL
T.D.S. yes this was fun event seen lost's of nice rig's and a lot of carnage. Amazeing how crazy people get with a few bud light's or aka can's of courage will be posting pic's soon
Posted on March 16, 2009 at 6:35pm —
Comment Wall (6 comments)
- At 11:46am on June 20, 2009,
Mo said…
- Hey bud how u doing? I'm good. I got enough money together to start rebuilding my 383 stroker. I had to put the crankshaft in the shop to turn the journals and had the block cleaned up too. I am ready to put it back in my truck today and if all comes together OK, I will be back on the road by tonight or tomarrow after the Nascar race. I would like to see some pics of your Jeep. Post or send me some when you can. Later, MO
- At 1:19pm on May 9, 2009,
anthony arbogast / my nissan said…
- i need some advise on repairing the frame on my truck, it is rotted. or maybe some advise on building a new frame.... plz any advise would be nice thnx anthony
- At 9:37pm on March 10, 2009,
Tony Muckleroy said…
- Feel free to post up in the Commerce section. Very few on the board right now, but you know how searches draw people in. You might have just the thing that 2 million people are looking for! ;o)
- At 1:00pm on March 10, 2009,
Tony Muckleroy said…
- Thanks for visiting the board (xjTalk.com) and taking the time to register. As you could see the board is just getting started, so every new registration counts!
- At 1:15pm on February 27, 2009,
Mo said…
- Thanks and I will deffinetly take you up on your offer when I need some help. My next project when money allows is lockers. I don't have a problem with doing the work but knowing what I need to do the job at hand. I put a 3/4 ton 14 bolt full floater with a disc conversion I installed in the rear and d-44 in the front with 4.10s but with the 35" tires, I am thinking 4.56s. Hopefully, we will be able to talk again when the time comes. Oh ya, I tried to find your shop on the webs and didn't find anything yet. Thanks again, Mo
- At 11:56am on February 27, 2009,
Mo said…
- Hi gang, Glad to have you aboard. I am the owner and the builder of a 1951 Willys pick up and am in Northern California. For the last 22 years I have rebuilt this truck to what you see today. I still have a bunch of things I want to do to her but, yea the economy is kicking my butt too. I have nickled and dimed my way through this build with a minimum of funds. It is also my dayly driver. Anyway just wanted to say hi and good luck with your shop. I will try to drop by if I am in the area some day.
Profile Information
- First Name
- aaron
© 2009 Created by Gearhead
