Network for PowerBlock fans
-
mrinfinit3
- 28, Male
- Wildomar, CA
- United States
- Share
mrinfinit3's Page
Latest Activity
NO problem about the door panel
My appologies on the motor assem. I forgot that they changed it in mid year 98. IN your 99' the sliders are part of the entire Regulator assembly since bmw converted it to a cable driven unit. I don't blame 'em the...
Hi I had the question regarding the power windows on my 1999 528i. I could not locate the plastic sliders you mentioned on bavauto.com. By chance do they have another name for that part? Thanks again for your help. Jeff
mrinfinit3 said:mrinfinit3 said:mrinfinit3 said:93' 325i (sedan) 178k miles M50 block
S52 head (converted to single vanos thanks to Dr.Vanos.com)
S50 cams
Custom eprom tune/chip (9k rpm limit)
H/R springs w/ Tokito Struts/shocks
Centerforce stg II...
mrinfinit3 said:mrinfinit3 said:93' 325i (sedan) 178k miles
M50 block
S52 head
S50 cams
Custom eprom tune/chip (9k rpm limit)
H/R springs w/ Tokito Struts/shocks
Centerforce stg II clutch
M3 flywheel
3.5" Euro HFM/MAF
24# cobra injectors
AEM Unive...
mrinfinit3 said:93' 325i (sedan)
178k miles
M50 block
S52 head
S50 cams
Custom eprom tune/chip (9k rpm limit)
H/R springs w/ Tokito Struts/shocks
Centerforce stg II clutch
M3 flywheel
3.5" Euro HFM/MAF
24# cobra injectors
AEM Universal Fuel press....
93' 325i (sedan)
178k miles
M50 block
S52 head
S50 cams
H/R springs w/ Tokito Struts/shocks
Centerforce stg II clutch
M3 flywheel
3.5" Euro HFM/MAF
24# cobra injectors
AEM Universal Fuel press. regulator
RE front strut/stress bar
Turner Motor spor...
The door panel is held by 7 (i think 7) plastic poppers. Start by removing the bottom (pull out) of the panel 1st. After the bottom is out push in and slide the door handle bezel out. Behind the bezel is 2x torx (T28 maybe) screws. remove those sc...
Any and all bimmers
Profile Information
- First Name
- jake
1993 BMW 325i sport
1993 BMW 325i sport
Current mods:
Engine/ Drivetrain mods:
-Dinan CAI
-3.5 Euro HFM/MAF
-Mustang 24lb injectors
-Mishimoto Alum. Radiator
-80*c OE thermistat
-Centerforce stg. 2 Clutch
-Findenza flywheel
-ANSA (BAV. Auto) cat. back exhast
-Rouge Engineering Sport shifter (shorter throw)
-Denon stg 2 ECU/Eprom chip
Body/Lighting mods:
-E46 M3 fender grills (glassed and molded)
-ACS front bumper
-DEPO Euro clear tail lights
-DEPO Glass headlights w/ Phillips HID's/Ballests (8000k)
-Sonar Clear corner lights w/ matching blue bulbs
-Sonar Projector Fogs paint matched to car.
-3/4" Fender roll front and rear
-M3 rear valance
Comming soon- DEPO E36 Euro side markers and HID fogs
Chasis & suspension:
-Rouge Engineering complete eurathane bushing kit
-Rouge Engineering solid RTABs
-Turner motor sports Alum. Front Control arms w/ upgraded solid Ball joints (in and out)
-H&R sport springs
-Tokito M3 Struts
-Tokito Shocks
-Rouge Engineering Strut and shock mounts
-Turner stabilizer bar w/ matching links
-Rouge Engineering CF Strut tower bar
Audio/Video:
Power:
1x Autolite platnum 880CCA (starting batt) (trunk)
1x Optima red top (trunk)
1x 2 Fared digi. cap (trunk)
1x Voltage stablizer (engine bay)
2x 4 awg engine grounding kit (engine bay)
Amps:
1x Audiobahn 2800HC (modified via factory sponcer ~1800w x 1 @ 3ohm / ~800w x 2 @ 4ohm)
1x Audiobahn 4600HC (modified via factory sponcer ~625w x 4 @ 2ohm / ~300w x 4 @ 4 ohm)
1x Line out. amp AEQ7 ( input 2-8volt - output 6-12volt / 7 band passive EQ w/ time adj.)
Speakers:
2x Fusion 5.25 mid bass (kicks)
2x Fusion 1" tweets (door)
2x 4" powerbass mid-bass (door)
2x 4" Infinity Kappa 2-way (rear deck)
2x 3/4" Infinity Kappa tweets (rear deck)
1x Audiobahn 12.5" High excursion DVC 6ohm Sub
Enclosures:
1x sealed 12" 1.25 sq ft Sub box (temporary)
Current mods:
Engine/ Drivetrain mods:
-Dinan CAI
-3.5 Euro HFM/MAF
-Mustang 24lb injectors
-Mishimoto Alum. Radiator
-80*c OE thermistat
-Centerforce stg. 2 Clutch
-Findenza flywheel
-ANSA (BAV. Auto) cat. back exhast
-Rouge Engineering Sport shifter (shorter throw)
-Denon stg 2 ECU/Eprom chip
Body/Lighting mods:
-E46 M3 fender grills (glassed and molded)
-ACS front bumper
-DEPO Euro clear tail lights
-DEPO Glass headlights w/ Phillips HID's/Ballests (8000k)
-Sonar Clear corner lights w/ matching blue bulbs
-Sonar Projector Fogs paint matched to car.
-3/4" Fender roll front and rear
-M3 rear valance
Comming soon- DEPO E36 Euro side markers and HID fogs
Chasis & suspension:
-Rouge Engineering complete eurathane bushing kit
-Rouge Engineering solid RTABs
-Turner motor sports Alum. Front Control arms w/ upgraded solid Ball joints (in and out)
-H&R sport springs
-Tokito M3 Struts
-Tokito Shocks
-Rouge Engineering Strut and shock mounts
-Turner stabilizer bar w/ matching links
-Rouge Engineering CF Strut tower bar
Audio/Video:
Power:
1x Autolite platnum 880CCA (starting batt) (trunk)
1x Optima red top (trunk)
1x 2 Fared digi. cap (trunk)
1x Voltage stablizer (engine bay)
2x 4 awg engine grounding kit (engine bay)
Amps:
1x Audiobahn 2800HC (modified via factory sponcer ~1800w x 1 @ 3ohm / ~800w x 2 @ 4ohm)
1x Audiobahn 4600HC (modified via factory sponcer ~625w x 4 @ 2ohm / ~300w x 4 @ 4 ohm)
1x Line out. amp AEQ7 ( input 2-8volt - output 6-12volt / 7 band passive EQ w/ time adj.)
Speakers:
2x Fusion 5.25 mid bass (kicks)
2x Fusion 1" tweets (door)
2x 4" powerbass mid-bass (door)
2x 4" Infinity Kappa 2-way (rear deck)
2x 3/4" Infinity Kappa tweets (rear deck)
1x Audiobahn 12.5" High excursion DVC 6ohm Sub
Enclosures:
1x sealed 12" 1.25 sq ft Sub box (temporary)
mrinfinit3's Photos
Comment Wall (2 comments)
- At 5:20pm on September 27, 2009,
mangfu said…
- Do you know if its possible to swap the S54 head onto an M50TUB25 block?
- At 9:08pm on February 19, 2009,
logan corder said…
- a local guy that has a sign shop airbrushes them and hes a school teacher to
© 2009 Created by Gearhead
