Network for PowerBlock fans
lowridercadillac1989's Groups
-
nature crews
24 members
-
CLUB CHEVY/GMC
280 members
-
under construction
498 members
-
Low Class Customz
6 members
-
On The Set
524 members
LOWRIDERS ARE THE OFF SPRING OF OLD SCHOOL HOTRODDING
Latest Activity
first of all .030 over is not a "power upgrade" un-noticeable to say the least. but the compression ratio will be an important factor too. if you have not purchased pistons yet get some with +20cc domes. with 76cc heads that will put you around 11...
this group is for anyone that needs info on engines of any make!
this group is for anyone that needs info on engines of any make!
i will try to get the casting numbers off the block iam using but i know it came out of a 1972 impala station wagon it was a 2bbl carbed motor with a 400 trans
well I think that it will make atleast 390 to 421 im just guessing that though it also depends what year 350 because in 1969 there is two 350's for that year the first one makes 250 hp
345 tq and there is a 350 that makes 380 tq
i know the heads anit all that great but iam building this motor on a tight tight budget
i have a 1972 sbc 350
iam planning on having it bored 30 over
i got a line up on a 488 lift crane cam with lifters
full roller rockers
and i have a set of 1.94/1.50 76cc heads from a 1978 350 that i want to rebuild
i was wondering what kinda power...
i have a 95 chevy 350 whats the most hp can i get? what combo? wit a reasonable price this is going in a 94 suburban. towing/mudboging
Profile Information
- First Name
- charles
lowridercadillac1989's Photos
lowridercadillac1989's Videos
-
-
CADDY HOPPING
Added by lowridercadillac1989
Lowridercadillac1989's Blog
here ya go
not sure how far your willing to travel
http://toledo.craigslist.org/bar/1288141746.html
http://toledo.craigslist.org/bar/1288141746.html
Posted on July 26, 2009 at 7:14pm —
Comment Wall (27 comments)
- At 11:16am on August 16, 2009,
Mark McK. said… - I hope that helps you, kinda hard to explain. Since your painting the whole car the inverted way makes a nicer job (painting the stripe color first). your stripes will look like your masking when you ge it masked off. Your basicly covering what you dont want painted. I'm sure you'll do just fine. Post some pics when you finish, like to see it.
- At 3:58pm on August 6, 2009,
Impala Builder said… - wow bro, nice pictures of your car. I love the video of the car hopping..
- At 7:48pm on June 4, 2009,
jose said… - damm those vid on my space r nasty
- At 7:11pm on April 2, 2009,
jose said…
- love the in side of that trunk
- At 2:57pm on March 29, 2009,
jose said…
- damm nice caddy ..
- At 11:35pm on March 21, 2009,
greg said… - that is a sweet ride guy. I always wanted to build one but I never have. I had a 81 cutless that I only made it as far as putting 80 spoke luxers on but I didn't have the guidance to help me with putting switches on it, so I just stuck to air shocks. Sweet though. Nice work.
- At 11:30pm on March 21, 2009,
greg said…
- thanks guy for checking on that for me. was just up late one night and was thinking about it. Thanks agin
- At 4:15am on March 13, 2009,
dson said… - nice ride!. that caddillac is clean. give you some props on your ride.
- At 2:56am on March 2, 2009,
James said… - HI engine grooup Im new to site.I have a 2007 sierra cwcb. i've install a intake,exhaust & headers. what else can i do too gain hp. I can install under drive pulleys, would my next addition be supercharger. I ask for feed back.
- At 9:03pm on February 17, 2009,
Raging64 said… - Send me a picture of the rear Differential cover, I should be able to tell ya if it is a 8.5" ring gear setup. raging64@hotmail.com
© 2009 Created by Gearhead
