Tiggsy's Page

As you can see the roof is chopped 4 inches the truck is lowered 8 inches all around doors tailgate and tail lights have all been shaved when i chopped the roof i quartered it and put in a roof skin to keep the contour i cut out the rear window fram and lowered it 4 inches to sit it at bed height instead of cut it down so now all windows are the same size body lines on the inside of the rear pillars have also been moved down to keep the stock look the tail gate is still there just cut out the chevy stamp and welded in a skin that includes the rollpan so its all one piece 18 guage steel sheet 60 inch fire and ice led strip used for rear tail lights lower body indents for the stock rear bumper were also shave out and moleded into the bed
front bumper has also been cut down 1 inch on each side and brackets have been swapped side to side and welded back onto the frame rails to move the bumper closer to the body motor is the org 305 slighty built with a 3 stage cam ported and polished the heads edelbrock performer intake rebuilt and tuned quadrajet carb motor has been cleaned and painted hugger orange rims have also been cleaned and painted hugger orange and wrapped with 255 65 15 tires interior is stock for right now i have a set of low back bucket seats that im gonna have recovered and then build a custom console thats runs right off the dash down the center and right into a speaker enclosure
Like i said this truck is for sale if your intreasted in a project truck its 85% done and you can still add your own touch if you want so let me know i have over 300 pics from start to where it is now