Scott Slade's Friends

Scott Slade's Groups

The Mojave Trails Rock....!!!! Oct 1

Loading…

At 8:18pm on November 1, 2009, Corey Smith said…: Scott read your question in the trucks section about taking out your airconditioning GM and the aftermarket makes a peice that if you take out the compresser it bolts right in place with a dummy pully to take place off compresser no belt change neaded. I have done this many times on a few gm,s I have had..I got my last from carquest or UAP...Godd luck hope I helped

At 5:42pm on October 8, 2009, Tom Snyer said…: i looked in my book stock adjusting setting is 1 3/8" from the flat on the bar to the bottom of the head of the bolt. if you go too far you might have to have a alinement on the front end.

At 4:59pm on October 8, 2009, Joe Guidotti said…: lol sounds like ur a smart man then.. i would have done the same thing ;)

At 11:26am on October 8, 2009, Tom Snyer said…: hi scott yes you can lift the front of your truck, on the torsion bar thier is what they call key thier is a adjusting bolt that you can turn in . look in a book i think the dimenition is 1"3/8 not sure anyways ,I turned mine in 3/8" and got 2"lift out of mine easy fix and cheep. oh ya jack the front end off the ground before you turn in the bolt,good luck

At 8:55am on October 1, 2009, alyssa batt said…: theres always somewhere to explore!! I am what we call an adventurer :P

At 3:57pm on September 30, 2009, Joe Guidotti said…: wow , yours certainly gave you some issues. thats unfortunate. by the sounds of the tranny ur gettin, im sure that wont be the issue anymore..lol. you should replace the oil pump and sending unit while u got the tranny out... for good measure ye know.. and the lift sounds good just dont crank em all the way, it'll cause the back end to sag prematurely.. ive gone thru 2 sets of leaves. one with add a leefs too. if u can stay away from blocks.. ur springs hate them.. so if u can grab older super duty springs or get a set made .. it;'l be def worth the extra 100 bucks

At 5:03pm on September 23, 2009, Joe Guidotti said…: bought it for 1800 bucks too canadian

At 5:02pm on September 23, 2009, Joe Guidotti said…: hey scott , love the rig.. i had one too.. a 94. the back doors wouldnt open from the outside.. and the holes from the cages were all over the place.. lol it rocked.. the guy before me had put a 4 inch lift on it and 33s.. let me tell ye.. we beat the sh#t out of that truck.. never plated it..but it was alot of fun!!! i see yours is a adventure rig.. lol def. is! have fun!

At 10:30am on September 21, 2009, Scott Slade said…: Hi Gang, Thought I would show some of our pictures of our Adventure Rig and the build up.

Welcome to
myPOWERBLOCK

Sign Up
or Sign In