Network for PowerBlock fans
Fultron's Page
Latest Activity
they just need to put a ls408 and a 4l80 and that was that tranny right think it was
I think they went through the block to make sure it would handle the upgrades that the planned to do in the future.I would not have left the leaking valve,nor the stock pistons but thats just me.It will be interesting to see what other plans they ...
Brett,
I too dropped a small block into a 4 cyl s-10 way back about 1991. First I found that the stock 4cyl rear axle ratio was 4.10 single track. I cheated and welded the spider gears because all I was going to do was street race it. I took a st...
I'm just starting a frame off body restoration on my 64 Pontiac GTO, with a little help from my wife. I don't you, but i'm doing this on a really tight budget. The hardest parts to get will be the stock 389 tri-powermotor, ( or bare block.)I used ...
TransAmer99,
Why not just drop it in like it was and then upgrade as time goes on. It ran fine why worry with freshining it up. It has cast pistons and stock rings if they spray it, it wont last anyway. Why not spend the money on cam and timing c...
I'm thinking that the first couple of episodes is just to get things going - it is part of the "Build on a Budget" series, after all. After they get the car going, there will probably be head upgrades, a hotter cam... all the steps that go into bu...
I agree... I was wondering the exact same thing .... if it ain't broke ... don't fix it. I am planning on dumping a Small Block into my 95 S10 this summer .... Depending on what I find available and in good running condition is what will be going ...
What the heck are they doing this episode? First the spend $1200 on a 2005 pull out LS 6.0 with wire harness and PCM that runs fine. Then they take it appart and clean it up and install new rings, bearings, $360 pump and chain but didnt address a ...
Group for HorsePower enthusiast to show off their latest projects. Upload photos, start discussion, and watch video.
Profile Information
- First Name
- Adam
Comment Wall
- No comments yet!
© 2009 Created by Gearhead
