Network for PowerBlock fans
- Dustin Nielsen
- Share
Dustin Nielsen's Page
Latest Activity
nice xj
first time out with my jeep
Group for Jeep enthusiast. Upload and share your photos with other Jeep owners. Ask questions, share tips, and watch video.
Profile Information
- First Name
- Dustin
this is my jeep im 19 and have had to work on my jeep 200 to 400 $ at a time it takes a while to build it up that way but im proud to say iv done the work myself and with a few buddies
Dustin Nielsen's Photos
Comment Wall (6 comments)
- At 9:19am on November 1, 2009,
Tom Snyer said…
- hi dustin did you figure out how to get your front end apart ? hope so , i looked at a nabor's jeep like yours hope i didn't through you off track ,
- At 7:03pm on October 29, 2009,
Tom Snyer said…
- one more thing when you get the spindle to move in one deerection put screwdriver in the space before you hit it the other way ,that way it will move out each time it moves,
and won't bind on the studs
- At 6:39pm on October 29, 2009,
Tom Snyer said…
- ya i forgot about that well this is how i have broken the spindle free,hold a 2x4 on the side of the spindle then hit it with a 4lb hammer side to side up and down it will come free be carefull not to reck threads on studs and put 2x4 to cover spindle threads , if you can get one of thouse big red or green plastic slug hammers wood be better,still use the wood . allso i have taken a one inch width cole chilse and put it between the base of spindle and yoke but stay away from the studs .let me know how it goes
- At 2:07pm on October 29, 2009,
Tom Snyer said…
- hi dustin hows it going did you do your ball joints yet? if not you might want to use a coathanger to hold up your calipers so you don't hurt your rubber brake lines. you can also use your ball joint press to put in the U-joints
- At 3:57pm on September 29, 2009,
Pat /Heather XJ 4X4's / 1CSI said…
- great job i am proud of you it looks good .
- At 2:27pm on September 29, 2009,
Dustin Nielsen said…
- will have photos up soon
© 2009 Created by Gearhead
