"here one is 1996 corvette lt1 t56 full length headers 2.5" bbk x-pipe aerochamber mufflers , i did all the wiring and fab work for mounts, custom trans crossmember, exhaust its a fairly straight forward swap, most any pre made v8 swap parts…"
"Arthur, the Jimmy is an 85, it doesnt have any power anything except brakes (and soon to be gas pedal) It originally came with a 2.8 dont know if it was a carb (most likely?) or injected. so the multi switch is not needed, It also doesnt have any…"
"Hey Arthur thanks! was trying to make sure if that multi-function switch has to be an integral part of the PCU when I take and put that LT-1 into the jimmy. I have noticed in my "unraveling" of the interior wire harness that that multi…"
"Hey Arthur, Daryl here,,,,,,is the 2nd gen you speak of the same or similar to the LT 1 engine? would that pan gasket fit it? allmost sounds like an odball engine, Was it used commonly in the USA, or for an overseas market perhaps? The 2nd gen small…"
I am interested in the road rallies and was wonderinig were on line one can find info on them.......Just Google Road Rallies of North America? DarylSee More
Rally racing features real cars racing against the clock on closed-off sections of real roads that are usually unpaved and unforgiving. Lasting several days and cover hundreds of miles through rain, snow, day or night.
"Hey Arthur this is Daryl.................Whats the recipe for your 540 ponnies?............would like to try it on the LT-1 Its already rated around 375 at the crank (300 plus at the rwhp) Any chance of getting the Secret reciepe?.......LoL"
"Wilfredo, I could'nt give you a break down on how much, but there is an adage from a race legend years ago and it goes a bit like this.................."speed cost money.........how fast can you aford to go?' Sorry that its not much…"
"Did the engine overheat at all? How long was it ran with the water/anti-freeze in the oil? Sounds like maybe it did some internal damage, I.E cylinders/piston and ring damage (lack of power) Lifters would also be affected in similar way. Do a…"
Hey Daryl,,thanks for the invite,,yea,,,ther are several of those around here where I live,,,if you can give me a couple of days,,I'll get you a list of websites that will help with your project.I even have a site,,,that will build you complete harnesses.I should have it done by Saturday,,,just nudge me and I'll shoot it to ya.