Network for PowerBlock fans
Alan D. McCrumb's Groups
-
engines
394 members
-
XTREME 4X4
1207 members
-
FORD TRUCKS
318 members
Alan D. McCrumb's Page
Latest Activity
I would go with an Edelbrock performer manifold for better drivability and torque
Stock manifold should be fine...i would recommend the holly truck avenger carb look for a 750 or larger to feed that beastly 460...my j10 is getting a 454 and i know the fuel air requirements of a true big block...you can regulary find the 770 on ...
I live in nova scotia canada ,owr winters get pretty cold .I built and rebuilt many carb over the last 15-20 years playing with these iron mules and the coke system I've had the best luck with is a vacuum choke.and the carb I've allways prefered w...
Sam and Douglas, I have toyed with the idea of installing a TBFI type of "carb" however at a cost of close to 1500 bucks I have a lot to think about on going down that path. Thank you both for your input.
Thanks Spike, your input was greatly appreciated and I will take into consideration your experiance as I get ready to take care of this problem through out the winter.
Having grown up in Ohio, I agree with Sam. Change over to fuel injection. It is more reliable, and you won't starve for fuel on hills.
Douglas
I used to have an '86 F350 4x4, crewcab, dually. I live in SW, Mssouri, no high altitudes but winter snow & ice. Temps as low as below zero. I had an all stock setup. Poor mileage, hard starts, heat cracked exhaust manifolds. The intake manifold w...
the best is a manual choke but a fuel injeted is best for cold starts.well thats my two cents.
I have an 85 F350 460 C3 4x4, with an intake manifold leak. If I am going to tear it down to fix the leak I figure I might as well make sure the carb and intake are the right match and the best for my needs. This truck will/is being used as a camp...
this group is for anyone that needs info on engines of any make!
Well lets try this again because bone head here posted in the comment section. I have an 85 F350 460 C3 4x4, with an intake manifold leak. If I am going to tear it down to fix the leak I figure I might as well make sure the carb and intake are the...
New to the group... looking for anyone's input. I have an 85 F350 4x4 460cid C3 tranny. I have an aftermarket Edlebrock 4bbl carb, not sure of the cfm still need to research that part. However I need to fix an intake manifold leak this winter so I...
Just signed up to the group did a little research and did not find a thread that addresses my question. I have an 85 F350 4x4 460 C3 tranny. This is/will be a solid all around take to the lumber yard truck as well as my camping/hunting/fishing tru...
Group for Xtreme 4x4 enthusiast to show off their latest projects. Upload photos, start discussion, and watch video.
Group for Ford truck enthusiast. Upload and share your photos with other Ford truck owners. Ask questions, share tips, and more.
Comment Wall
- No comments yet!
Profile Information
- First Name
- Alan
© 2009 Created by Gearhead
