"I do know that you would have to get v-8 mounts the trans mounts might be the same do some measuring to be sure. the mustang shifter might work if the shifter mechanism on the trans id double check by looking at the mustang and the truck to make…"
sorry havent been on here in a while. The kid that bought my bII put a 289 with a c6 and dana 20 case. I would go with a 5.0 and a cast iron 4 speed with a 20 case. you get the granny first with the gear driven t case. plus the v8 power. Check www.therangerstation.com They have a lot of info on doing the v8 swap. Its an excellent source when building a bII.
hey sorry really haven't been on here much lately. My bronco has a rough country 4" lift with a pa 3" body.back half of the roof is cut and i made it removable. It has 34 10.50 15 tsl's on it.I made a set of half doors out of stock doors. It has an 8.8 in the rear and a exploder 35 in the front.Also has the exploder t case and front shaft on it. I'll try to post more pics real soon. I've been workin on my sami and haven't had a chance to do much of anything else. If you need any ideas let me know
there is a conv. kit to do such things as that with a 302 (5.0) you would get everything that you would need. but a 2" body lift for 31" tires 2" body lift 2" sup. lift for 33" cut out wheel wells 1" from bottom of body panels