Old Chevy Trucks in progress

Add a Comment

Comment by jake lambert on June 15, 2009 at 8:41pm

i have an 81 c10 with a 350 4barrel. i wanna make it sound rele loud and good. does anyone have any ideas on what i could put on it exhaust wise for makin it sound good?

Comment by Will Rice on May 19, 2009 at 7:47pm

ok mabey some one can help me... the diectional signals art working on my 85 c10 neather dose the horn can some one help me out with a check list to solve the problem

Comment by bookemdano on May 17, 2009 at 5:09pm

Will, it sounds like you've quite a project ahead of you. My 81 is still under construction after several years, but I did extensive body and drivetrain mods to it. stretched cab, air ride, 6.0l engine from a new truck, etc. Bruce Horkey offers a show bed kit for steel boxes it is an insert that allows you to still use your truck as a truck and show it off after. Welcome to the group and good luck with your project

Comment by Will Rice on May 17, 2009 at 11:24am

this is my 1985 chevy custom deluxe long bed with a small block 305ci and where starting a off body rusteration on it bringing it back to factory stock conditon...except there wont be any garbage in the 8 foot box and we're putting a wood bed floor and some nice wood stakes on the bedarm side

Comment by jevrolet racing on April 27, 2009 at 9:48pm

i have too many pojects i have to sell my 68

Comment by JAMES on April 11, 2009 at 10:19pm

I have a 1982 Chevy 1/2-ton pickup with a 6.2 liter diesel engine. I'd like to find out what's available for this engine that will give me more power without assassinating my fuel milage.

Comment by Dakota H. on April 5, 2009 at 7:26am

Here are some pics of my new truck. 1998 Chevy

Comment by ray martin on April 4, 2009 at 9:11pm

thanks bookemdano

Comment by bookemdano on April 4, 2009 at 9:14am

Ray that's the way to do it. Get the doors gapped first, then when they're perfect then set the fenders. Just be sure the cab is squared up on the frame with good(new?) body mounts. Trust me this is very important to the final alignment.....been there....didn't do that the first time!

Comment by dave on April 3, 2009 at 7:52pm

ohh you mean fenders ohh ok lol

• First
• Previous
• Next
• Last