mud boggin

Add a Comment

Comment by chrisco on December 8, 2008 at 12:13am

Comment by DENNIS on December 2, 2008 at 6:27pm

can you tell me what switches in the back of the tach have to be set for it to work on a v8. i bought it from someone who had it on a 6 cyl and i gotta figure it out for a v8. there is 6 switches on the back and some need to be up and down. if ya can help me out i would appreciate it.

Comment by Montana_Cowboy on December 2, 2008 at 10:40am

hey dennis im runnin a mac tool tac in my Chevy

Comment by DENNIS on December 1, 2008 at 5:32pm

any one ever see a tach made by mac tools before?

Comment by DENNIS on November 26, 2008 at 8:42pm

actually you can take the motor out too, whatever is easier

Comment by DENNIS on November 26, 2008 at 8:41pm

the only way to change the seal is to take the tranny out. then look at the shaft on the torque converter. if there is a wear mark from the seal then that plus a worn seal is why it leaks. if it has wear mark don't bother putting a seal on it get a new torque converter, or a sleeve from the parts store to go over it(if they make 1 for a torque converter) and most people dont have a lift either. so get on the ground like the rest of us, you gotta pay to play.

Comment by Jim on November 26, 2008 at 12:19pm

Hello all, new here and relatively new to mudding. 2007' SCrew with leveling kit and 33's. Hopefully 6"-8" lift and 35 or 37's in the sometime near future. Also want to get a bogger, striclty for in the mud.

Comment by Levi Driessen on November 25, 2008 at 8:19pm

hey every one i got a 78' chevy 3/4 ton with one ton axles and leaf springs and when i swapped my engine to fix the one that was in there i put in a 305 and pulled a 350 when i pulled is every thing was all fine till i went mud bogging and my torque converter seal blow. so here is the question how can i change that seal easily with one pulling everthing off. i am not all high tech with the lifts so im working on the ground can anyone help me?!!!!!!!!

Comment by Dominic Powell on November 25, 2008 at 1:50pm

i got a ford f150 i just dropped a 427 big block in it needs some work but runs great in the mud

Comment by MUD SLUT on November 25, 2008 at 9:22am

I like it dirty.."OH YEAH" More Horsepower More Mud NEED MORE MUD

• First
• Previous
• Next
• Last