Network for PowerBlock fans

dana 20 t case

it keeps braking what would be a good option? i run t-18 tranny and would like to keep it

Permalink Reply by Tom Snyer on November 4, 2009 at 6:41am: hi mat t-18 trany are a realy nice trany great low gear, dana 300 transfer case they have a low rang that might be what your looking for you will have to buy a adapter for it. what axle gears are you running and how big are the tires ? nice jeep looks like alot of fun . good luck; ▶ Reply to This

Permalink Reply by Travis Kirkman on November 4, 2009 at 8:34am: I have ran the dana 300 in 3 of my dual purpose jeeps and never had a problem...you can also pick up a used one pretty cheap. But if you have the cash go with the atlas II...expensive but amazing! -Trav; ▶ Reply to This

Permalink Reply by RECOVERY TEAM on November 7, 2009 at 11:51am: I'm wondering what part of the 20 keeps breaking, I ran a Dana 20 with about 450hp of small block Chev power, broke a lot of parts but never the t-case.; ▶ Reply to This

Permalink Reply by Matt lucas on November 15, 2009 at 12:34pm: i was wrong about the t case. it was the output gear on the trans. the homemade sleeve i put behind the gear failed the gear moved on the shaft and was only running on half the gear tooth and broke.I need the spacer or sleeve that goes on the output shaft behind the output gear on the t-18. When I payed 100 bucks I did not think it would be hard to find or duplicate.I guess i need to go to a machine shop and have it made.THANKS FOR ALL THE RESPONSES ALL HELP IS APPRECIATED; ▶ Reply to This