Sort by:
| Discussions | Replies | Latest Activity |
|---|---|---|
rebuilding my first 350 need some advicei have a 1972 sbc 350 iam planning on having it bored 30 over i got a line up on a 488 lift crane cam with lifters full roller rockers an... Started by lowridercadillac1989 |
5 |
17 hours ago Reply by Marion |
Camaro engine swap...which 350 version would you use?Hello from Canada!,... I have a 1985 Camaro Z28 project in the works with the original bone stock 305 in it. I'm just about ready to put ... Started by Ismo Ojaniemi |
21 |
18 hours ago Reply by Marion |
chevy timing advanceOK so i changed my 1991 305 tbi to a 305 with a 500cfm carb. The timing advance for the 305 was 0. Now im wondering what is suggested now... Started by Octavio Anaya Jr |
8 |
Nov 4 Reply by Robb Szwarc |
1993 caprice 305\383 swapi have a 1993 caprice with a stock 305 tbi iam planning on getting a 350 out of a 94 suburban and building it into a 383 stroker i was wo... Started by lowridercadillac1989 |
4 |
Oct 28 Reply by Robb Szwarc |
PCM and fuel pump questionI just changed my tbi system to carb. Im only getting squirts of gas. When i rebuilt the motor, this happened when i had problems with th... Started by Octavio Anaya Jr |
2 |
Oct 19 Reply by Octavio Anaya Jr |
Carb/intake help...I have an 85 F350 460 C3 4x4, with an intake manifold leak. If I am going to tear it down to fix the leak I figure I might as well make s... Started by Alan D. McCrumb |
2 |
Oct 17 Reply by Alan D. McCrumb |
1984 Quadra-jet CarbWell once again another thing has come up with my truck. It seems once its all running good something tends to go wrong, or it seem wrong... Started by Travis |
8 |
Oct 16 Reply by James Woods |
check oil light on s10on my 1988 s10 I got a check oil light although the oil has been changed. when it idle's the oil light is on when it idles and goes off w... Started by Aaron thomas |
1 |
Oct 14 Reply by Kingman Kid |
tuning a computer controled engine??????hi i put a 1986 tune port injected 305 in my jeep and i was wondering if you can fine tune it. the tps sensor has a setting of 5 volts ot... Started by Tom Snyer |
2 |
Oct 13 Reply by Kevin Lee |
Stupid Beginner QuestionHey everyone. Im starting on my first project and would like to ask a very beginner like question. How much work would it be to modify my... Started by Scott McCarron |
5 |
Oct 10 Reply by Kingman Kid |
© 2009 Created by Gearhead