Network for PowerBlock fans

lifted chevy trucks

Information

this group is for all those lifted chevy truck lovers

Members: 97
Latest Activity: May 28

Discussion Forum

1989 4x4 5.7Litre 6 inch Suspension Lift 3 Replies

I am looking at the Skyjacker or the BDS Lift, but don't know if something else is better. Anyone know of something better?Continue

Started by Timothy Brown. Last reply by Chilliwak Dec 8, 2012.

problem with electrical system in my 89 suburban 2500

I let my suburban sit all summer while out of town and when i came back i had no power to the starter of the dash. but i do have power to the light under the dash. im a high school student with more…Continue

Started by James A. Cross Feb 21, 2012.

need new tranny or transfer case 4 Replies

Allright fellow bowties, my transmission or my transfr case went south for the rest of the winter.I was wondering if any of yall had tried the monster transmissions ( episode on horse power)? I…Continue

Started by Ashley G. Scott. Last reply by Jeremy J Zimmerman Feb 19, 2012.

Startin the 58 chevy 3 Replies

I am trying to find a frame in the seventies that i can use to make my fifty eight a four wheel drive truck. Also a good frame to lift Continue

Started by Brian Harley Jorgensen. Last reply by Richard Reffuse May 8, 2011.

View All

Comment Wall

Comment

You need to be a member of lifted chevy trucks to add comments!

Comment by anthony robbins on May 28, 2013 at 6:51pm: Border patrol truck, I call it "Hulk"

Comment by Craig on November 14, 2012 at 2:23pm: Hey all. Lookin forward to trading ideas. Only mods so far are a 2" leveling lift, from bumper, and better breathing. Currently working on a pro comp lift, but may decide to go LAS. It's only a matter on mechanics, and function. I prefer live axle, and any info about how too's will be greatly appreciated, thanks.

Comment by John E Lynch on February 12, 2012 at 4:06pm: 17" lift Danna 60 front Danna 70 rear. (350 tbi I threw away) 454 with 400 trans. 550hp 715tq. The omly thin green about this truck is the Prius I ran over.. 10k CB power skip shooter. 38 1/2 Micky's going 44 next now that I cut the finders. The truck to the left is a lifted dodge with 33's

Comment by John E Lynch on February 12, 2012 at 3:45pm

Comment by Timothy Brown on February 11, 2012 at 8:55pm: I have a 1989 Chevy Silverado K1500 4x4 with a 350 with some work. Anyone done a 6-Inch Suspension Lift and know which one would have minimal exhaust and driveshaft modifications?

Comment by Clint French on November 30, 2011 at 11:14pm: well the day is finally here on sunday instead of watching powerblock gonna be installing my new front end and rear shackle flip shackles i will get lots of photos for here and looking foward to trying it out as this thing is really getting sloopy on the highway lol like driving drunk...the truck not me have at least 3/4 turn of play in the steering and last weekend front bearing started to howl so it deffinetly time to chang it out

Comment by Clint French on November 8, 2011 at 12:11am: i got a question that i though someone on here could help me with as you know i am putting a solid axcel into my 1989 chev k2500 i wanted to go with a dana 60 out of a ford f-250 but nobudy will sell me one over here they think they are made out of gold lol so i found a good dana 44 out of a f-250 rebuilt and regeared it almost ready to tear my truck apart and install with the crossover steering but was wondering if anyone knew what front driveshaft i will need to make this work or can i just take the front yoke off the stock one and go dirrectly to the u-joint to the dana 44 yoke and make the drive shaft longer so it wont over extend?????

Comment by Shelby Horner on October 16, 2011 at 9:16pm: 1990 GMC Suburban with a 6 inch lift, 36 inch Tires (1000 miles on tires and rims), Rebuilt 5.7 V8 with Vortech Heads and Performance Chip (Rebuilt about a year and a half ago) Newly rebuilt (Last spring) 700r transmission with shift kit . 456 Gears. Third row seat. About 10k in parts. Good running and very fun Truck! $5500 obo

Comment by Sterling Wayne Gibson on August 22, 2011 at 9:27am: getting ready to replace the body mounts on my 72 chevy 4x4. anybody have any suggestions or watchouts for doing this job?