FULL-SIZE CHEVYS

Add a Comment

Comment by Josh Swalwell on April 16, 2009 at 8:57pm

hey y'all i am new. i got a 2001 chevy silverado 1500 Z71. feel free to add me or meesage me.

Comment by bill griffin on April 16, 2009 at 7:43pm

i need a bumper with a wintch place in it. it would be for a 1980 chevy 4x4 1500HD. i would like to know were i could find one.

Comment by Ron on April 16, 2009 at 3:46pm

Hi everbody newbie join the full size chevys zachchev@fmtc.com Ron Zacharias

Comment by Alex Eck on April 13, 2009 at 8:08pm

i just got an 83 k20 scottsdale and i want to get some custom bumpers for it but i cant weld. where can i find some nice custom bumpers

Comment by ROB STAHLBAUM on April 13, 2009 at 11:05am

350 INJECTED STOCK AND IS SURPRISING IT KICKS ASS FOR NOW BUT WANT TO GO 454 INJECTED

Comment by Julian Modrzejewski on April 13, 2009 at 12:18am

Hey Guys, i'm currently looking to buy a full size 06 Silverado. I want to put a lift kit on it probably 6-8 inches and ofcourse big wheels and tires... My question for you guys is If i should get the 2500HD Diesel rather than the 5.7 or 6.0 litre (gas). I was told at a recent truck show that you can't make much power out of a gas engine after you lift them... The main concern is it worth the extra money and fuel mileage to buy the diesel. Any advice? Thanks.

Comment by RickyBobby01 on April 11, 2009 at 8:26pm

thanks for advice timmy. I've chopped the exhaust off after the cats and put turndowns on it. But I was stuck between choosing a programmer or like throttle body spacer/mass air flow sensor combo. But wasn't sure which one would work. But I think I'll start with what you said. Whats the best kind of programmer? The only ones I've found are for 2500s.

Comment by 4x4chevy on April 11, 2009 at 6:06pm

below is me and my truck it is a 2000 model

Comment by 4x4chevy on April 11, 2009 at 5:58pm

Comment by Ballzy on April 11, 2009 at 8:04am

nice suburban looks tough what motors spinin them 39.5's

• First
• Previous
• Next
• Last